POWERPLUS POWX00425 Drill/Screwdriver 16V LI-ION

With this cordless 16V Powerplus drill/screwdriver you drill holes in shelves or you assemble a new table quickly. You’ll have a 2 function (drilling and screwing) tool in the house. The auto-locking chuck (10mm diameter) makes it very easy to change bits and drills. With the left/right you can choose between fastening and loosening. Working in poorly lit spaces is not a problem: with the LED work light your workplace is always well lit. You operate the Powerplus screwdriver very comfortably thanks to the soft grip. Finally, the quick stop also takes care of your safety and comfort, as it immediately stops the chuck from turning. With the POWX00425 you enjoy total freedom of movement while drilling. You can choose between two different speeds settings and 19 torque positions (18 + 1 drill function) and a compatible charger and 2 batteries are included. So you can work a lot longer. The status indicator shows you the charge status of the battery. Done working? You nicely put everything in the BMC and your workplace is tidy.

SKU: YDRILC425 Category: Power Tools

Description
Reviews (0)

Description

Technical Specifications

Recommended Battery: 20V Li-Ion 1 500 mAh
Chuck Size: 10 mm
Chuck Type: Keyless Chuck
Impact Frequency: NA
No-Load 1st Gear: 0–400 RPM
No-Load 2nd Gear: 0–1 400 RPM
Max Torque: 35 Nm
Torque Setting: 18+1
Max Drilling Capacity (Steel): NA
Max Drilling Capacity (Wood): NA
Max Drilling Capacity (Brickwork): NA
Battery Capacity: 1 500 mAh
Charging Time: 1 h
Number of Speed Settings: 18+1
Expert Advice: Speed and torque are inversely related: higher speed gives lower torque and vice versa.
Specifications Description:
Start with a punch: Use an awl or trim nail to mark your drill point for accuracy.
Don’t use too much force: Let the drill do the work—excess pressure can break bits.
Step up sizes: Start with smaller bits and gradually increase size.
Use high speeds for wood: Drilling in wood is most effective with higher speeds.
Use slow speeds for metal: Lower speeds help effectively remove metal material.