MAC AFRIC Semi-Professional 1500 W Circular Saw
The MAC AFRIC 1500W Circular Saw is perfect for both DIY enthusiasts and trade professionals. It features adjustable cutting depth and angle settings, allowing for a wide range of cuts to meet various application needs with ease. Please note that the blade shown is for illustrative purposes only.
Description
Technical Specifications
Power Output: 1 500 W
Voltage Input: 230 V @ 50 HZ
No Load Speed: 5 300 RPM
Frequency: 50 HZ
Blade Diameter: 185 MM
Blade Bore: 20 MM
Blade Teeth Count: 24, 40 Teeth
Max Cutting Capacity At 90°: 64 MM
Guard Protection: YES
Handle Side: Back Top
Switch Position: Trigger/Under Handle
Cable Length: 2 M
Expert Advice
Setting the blade too deep causes it to be more dangerous than a correctly set blade because more blade is exposed while cutting.
Specifications Description
What should you avoid when cutting with a circular saw?
Do not hold or force the retracting lower guard in the open position.
Do not place hand under the shoe or guard of the saw.
Do not over tighten the blade-locking nut.
Do not twist the saw to change, cut or check alignment.
Do not use a saw that vibrates or appears unsafe in any way.
Do not force the saw during cutting.
Do not cut materials without first checking for obstructions or other objects such as nails and screws.
Do not carry the saw with a finger on the trigger switch.
Do not overreach. Keep proper footing and balance.
Do not rip stock without using a wedge or guide clamped or nailed to the stock.
Reviews
There are no reviews yet.